备注:此帮助参照Mac OS X Version 10.4.11的苹果电脑操作系统中的Mail软件(Version 2.1.3 (753.1) 为标准进行制作.采用alan@companyname.net.cn 邮箱做为邮件地址进行切图的.在实际设置时,请将邮件地址更改为贵司的企业邮箱地址.,相关软件的版本信息,请参见如下图示:

1. First, open Mail. Choose Create New Account .

2. Click Continue . The picture below will display. Select POP as Account Type . In Account Description field, input your description of this account, usually using the complete address. In the Full Name & Email Address, you should both input your complete email address.

3. Click Continue . The picture below will display. In Incoming Mail Server field, input mail.c7.corpease.net . And input your complete email address and password in User Name & Password respectively.

4. Click Continue . In Outgoing Mail Server field, input mail.c7.corpease.net . And select User Authentication . And input your complete email address and password in User Name & Password respectively.

5. Click Continue . You will see “Checking connection to SMTP server mail.c7.corpease.net”.

6. After the Authentication procedure is done, your account information will come up:

7. Click Continue . The system will come up with the information below.

8. Click Done . Now the account is set up. Start the software the system will display a Welcome pop up window.

9. Click No . And now you can send and receive e-mail through your account.

10.点击邮件菜单,点击属性按钮,看到如下图示,此页面显示多长时间检查一次邮件.系统默认是 Every 5 minutes.

11.如上图,点击"Accounts"按钮,看到如下图示:

12.如上图.点击"Server settings" 按钮. 看到如下图示.请确认发送服务器为 mail.c7.corpease.net ,端口为994.Authentication 模式为:password并保证user name 为邮件地址全称,password为邮箱的正确的密码.

13.如上图,点击Mailbox Behaviors按钮.看到如下图示:此选中注明,是否在发送邮件后要立即删除已发送邮件的副本(Erase copies of sent messages when:) :Never 等等信息,可以根据你的工作要求来做相应的设定.

14.如上图所示,点击" Advanced"按钮.看到如下图示: 此页面的三个选项都必须选中,其中 Remove copy from server after retrieving a messages: 的系统默认设置是 After one week ,您可以根据工作需要做相应的选择. 并注意端口是25,SSL 不要勾选

15.如上图,点击Junk Mail ,此选项有关一些垃圾邮件的设置,可以根据工作要求来进行相关的设置.

16.如上图,点击"FONTS & Colors"看到如下图示,可以修改邮件的相关字号及字体.

17.如上图,点击"Viewing "按钮.看到如下图示:

18.如上图所示,点击"Composing"按钮,看到如下图示,根据工作需要,做相应的配置更改.

19.如上图,点击"Signatures"按钮.此页面可以设置相应的签名.

20.如上图,点击"Rules"可以看到如下图示,在此可以根据工作需要设置相应的邮件规则,使邮件按您的要求进行分类保存在不同的目录中.

21.以上选项设置完毕后.帐号就算设置成功了.